HomeMy WebLinkAboutC.054.93010_0764Fees or die Department o Plannin •_En orcement are=
Permits: An individual permit is required for each individual building or structure, or each unit or
tenant space within a multiple occupancy building.
Permit fees shall be calculated according to the following.
Commercial P[Oieet9
Blanket
Occupancy
Buildin
Electrical Mechanical
Plumbing
Permit
Assembly
0.14
0.07
0.05
0.05
0.28
Business
0.11
0.07
0.07
0.05
0.27
Educational
0.13
0.07
0.06
0.05
0.29
Factory Industrial
0.08
0.05
0.03
0.03
0.15
Hazardous
0.08
0.04
0.03
0.02
0.13
Institutional
0.19
0.1
0.1
0.1
0.46
Mercantile
0.1
0.06
0.04
0.05
0.2
Residential
0.14
0.07
0.07
0.07
0.3
Storage
0.07
0.03
0.03
0.03
0.11
Sprinkler
0.03
0.02
Dry In Only (Spec. Building) Includes
slab inspections for
sub trades.
0.15
Retaining Walls
1 to 50'
$50.00 51' to 100'S75-00
> 100'
100.00
Fee Calculation for All New Construction Including Additions
A= Building Floor Area from 1 sf to 20,000 sf (includes heated & unheated area)
B= Building Floor Area Greater than 20,000 sf (includes heated & unheated area)
C= Fee per Square Foot from the Table Above
From 0-20,000 sf: A X C = Permit Fee
Above 20,000 sf (A X C) + %s (B X C)
Fee Calculation for Un Fits Renovations, Etc.
A= Total Gross Building Floor Area (includes heated & unheated area)
C= Fee per Square Foot from the Table Above
/:(AXC)
Plan Review Fee: New Construction $0.01 per sf; Up fits, Renovations $0.005 per sf
"Blanket Permit Fee includes Electrical, Mechanical, and Plumbing permit fees only. It does not
include Zoning, Environmental Health, or any other fees. All contractors must fill out the
appropriate permit application form for their portion of the project (proper permit applications
must be approved prior to performing inspections)
* Not single family
SINGLE FAMILY RESIDENTIAL
Blanket
Buildin Electrical Mechanical Plumbing Permit
0.15 0.07 0.07 0.07 0.31
Fee calculation for all New Construction Including Additions & Moved Houses
A= Total Gross Building Floor Area (includes heated & unheated area)
C= Fee per Square Foot from the Table Above
(A X C) = Permit Fee
Fee Calculation for Residential Renovations and Accessory Buildings
A = Total Gross Building Floor Area (includes heated & unheated area)
C = Fee per Square Foot from the Table Above
Ys (A X C) = Permit Fee
"Blanket Permit Fee includes Electrical, Mechanical, and Plumbing permit fees only. It does not
include Zoning, Environmental Health, or any other fees. All contractors must fill out the
appropriate permit application form for their portion of the project (must have the proper permit
applications approved prior to performing inspections).