Loading...
HomeMy WebLinkAboutC.054.93010_0561 (2)i) Use ofinitials, ii) Use of numbers either ordinal or written, iii) Use of suffixes as primary road name, iv) Sound alike and deceptively similar names, V) Use of special characters such as hyphens, apostrophes, or dashes, vi) Old English spellings, vii) Vanity names. H) Permitted Prefixes and Suffixes The following is a list of approved suffixes and acceptable abbreviations. No approved suffix shall be allowed within the street name. Name Avenue 2 Letter Abbreviation 314 Letter Abbreviation Boulevard AV (municipal only) AVE Circle BL (municipal use only) BLVD Court CR CT CIR Drive DR Highway HW HWY Lane LN Loop LP Parkway PK (municipal use only) PKy Place PL (subdivision use only) Road RD Street ST (municipal use only) Trail TR (residential applications only) Way WY (subdivision use only) Sec. 11-33 Responsibility for Naming Roads and Installing Signs A) Subdividers or other dedicators of public roads shall reimburse the County for the expense to make and to install signs at the intersections of all streets within their subdivision or property. Any petition submitted to name a private road shall include a reimbursement to the County to make and to install the road sign. The amount of the reimbursements shall be as shown in the official Iredell County fee schedule. B) Road name changes initiated by petition shall be subject to a fee as described in the fee schedule, as well as the cost of all new signs associated with the change. Sec. 11-34 Road Name Signs and Standards A) Road signs and standards shall meet NC DOT requirements. B) In residential districts at least one (1) road name sign shall be mounted at each intersection. C) Road name signs shall be placed at least two (2) feet behind the face of a curb with a minimum clearance of seven (7) feet from the bottom of the sign to the projected edge of pavement. If there is no curb and gutter, the signs shall be placed behind the ditch line, out of the maintenance area. The lateral clearance from the road's edge should be six (G) feet. D) Signs shall be located to optimize nighttime visibility. E) Signs shall be set in the center of the turning radius in such a way as to be visible from both intersecting roads. 12